Studio Audio Output

[Keith]

I have Breakaway DJ working great with Otsav but this means Ots Studio will not give me any audio output, does anyone have a workaround?

Thanks in advance

Keith

[MicMike]

OtsStudio uses your system's default output device. Check Control Panel\Hardware and Sound\Sound to see if that is set to Line 1 Breakaway Pipeline. Then go into BDJ's I/O Configuration and make sure Input 1's Interface is set to KS and its Audio Device is set to Breakaway Pipeline 1.

Select or de-select ASIO ouput on the Common line depending on your system's support for that. In the Output line above that, you should see your sound devices in the drop-down. Make the appropriate selection. Clicking Test will tell you if your card isn't responding. If all goes well, click Finish and you're set.

The above works for me, at least. Hope this helps you.

[Keith]

Thanks MicMike

Big thumbs up for that one, i had to update the sound drivers to get it work but without your detailed explaination i would have never worked it out...

Thanks again

P.S. It's sounding great!

Keith